• NEWS
  • 10mm drag chain comparison: 10×10 or 10×20 MT size?

10mm drag chain comparison: 10×10 or 10×20 MT size?

TECHNICAL NOTECOMPARISON

Key data

Material and construction
Inner dimensions, height × width
Color
Working temperature
Recommended gap

Abstract

The 10×10 MT chain suits compact cable routing where a 10 mm × 10 mm inner opening is enough. Choose the 10×20 MT chain when the cable space needs the same 10 mm height with twice the listed inner width.

10mm drag chain comparison: 10×10 or 10×20 MT size?
Illustration for reference; see the product page for actual photos and specifications.
§1

The size difference that drives the choice

Both options use reinforced nylon PA6 and PA66, are black, and have an open-type construction that cannot be opened from the side. Their key distinction is the inner opening: the 10×10 model provides 10 mm × 10 mm, while the 10×20 model provides 10 mm × 20 mm.

Criterion10×10 MT mini cable chain for printer10×20 MT mini drag chain
MaterialReinforced nylon PA6, PA66Reinforced nylon PA6, PA66
Inner dimensions, height × width10 × 10 mm10 × 20 mm
ColorBlackBlack
Working temperature-40-130 ℃-40-130 ℃
Recommended gap10%10%
FeaturesWearable, elastic, fire proof, self-lubricatingWearable, elastic, fire proof, self-lubricating
Open sideCan’t be openedCan’t be opened
§2

Which 10mm drag chain fits your installation?

Pick the 10×10 MT chain when the moving cable group fits within a 10 mm × 10 mm inner opening. Its compact format is identified for printer use, so it is the practical starting point for a printer cable route with limited internal space. Check the cable bundle dimensions before ordering, including the required 10% gap.

Pick the 10×20 MT chain when the route needs 20 mm of inner width while 10 mm of inner height is sufficient. This gives you a wider listed opening without changing the shared material, temperature range, recommended gap, color, or open-side construction.

§3

Shared material and operating details

We make both chains from reinforced nylon PA6 and PA66 using original new nylon raw material. Both models are black and list a working temperature of -40-130 ℃. Their listed features are wearable, elastic, fire proof, and self-lubricating.

The recommended gap for each model is 10%. Because both open sides cannot be opened, plan cable placement and access around the chain’s fixed construction. For the wider option, view our MT Series nylon cable chain range alongside your required opening size.

The two options

10×10 MT mini open-type reinforced nylon cable chain for printer10×20 MT open-type reinforced nylon mini drag chain

Check before you request the chain

Measure the cable bundle and compare it with the required inner height and width. Send us the selected opening, movement layout, and required quantity so we can match the request to the 10×10 or 10×20 MT configuration.

The company

Shijiazhuang Anjie Electric Co., Ltd.

Shijiazhuang Agile company is established since 2008. We got more than 13 years experience in the production of drag chain, guide rail bellow cover, nylon corrugated bellow pipe and related products. Our products focus on cable protection, rail protection in the reciprocating motion. We got about 100 employees and our factory is located in Yanshan county of Hebei province, and got about 6500 square meters’ production area. Our office is located at Shijiazhuang city, with about 300 square meters’ area.…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.